Egress Window Drain Pipe

The window well drain may be linked into an existing drain tile system or directly into your sump pump to redirect the water out and away from your home.

Egress window drain pipe. They allow natural light into the space. Fastening of window well using concrete screws the window well is fastened to the wall. Cover the base of the window well with about 2 in 5 1 cm of gravel to facilitate drainage.

The area of a window well shall not be less than 9 square feet with a horizontal length width of no less than 36 inches. Ideally one must invest the extra amount to build a drain pipe that pumps extra water directly to an even further area to avoid weakening the exteriors. They will ensure that fresh air circulates in the space and prevent.

Typically the drain lines are 4 light weight sewer and drain pipe. Next insert a riser pipe into the newly installed drain tee. For good window well drainage water must be able to penetrate the gravel layer and make its way to the weeping tile via the drain pipe.

This has replaced the old clay tile drains that were used years ago. Install a drain pipe in the window well and partially fill the well with gravel. Complies with local residency standards.

Egress window well code requirements. My understanding is the drainage under the egress window will be integrated into the interior perimeter drain tile system. Egress window installation having egress windows in your basement makes a big difference for the basement.

When the sill height of an egress window is located below grade common for egress windows provided for a basement a window well must be provided. A window well drain is very similar to the drain in your kitchen sink if it is plugged with food water will not drain away. This makes the space usable as a living space.