Maytag Refrigerator Compressor Not Running

Power is applied to the compressor motor windings through the overload device and the relay is used to add the start winding in the circuit until the compressor is at running speed.

Maytag refrigerator compressor not running. This is a small box on the side of the compressor with several wires feeding in and out. A bad compressor start relay will also prevent the compressor from running. Depending on your model you might find the defrost timer behind the kick plate at the bottom front of the fridge.

Part of the compressor circuit the overload protects the compressor by acting as the sensor for the compressor motor windings as power comes in. I have had issues for weeks and have asked questions of justask twice. So if the defrost timer is malfunctioning the compressor may not be running its cycles correctly.

If the fans are running and your compressor won t start or if you hear a clicking sound from the unit check the overload relay for signs of overheating or arcing. Repeat until water begins to flow. A noisy condenser fan usually causes rattling noise to come from the back of the fridge.

Maytag refrigerator compressor seems to be getting to hot and thermal protection kicking in. Flushing the water system forces air from the water line after the refrigerator has been installed or the water filter has been replaced. Or in a side by side unit it might be in the back.

My question do i need new compressor fan motor or new compressor. If the start relay is defective the compressor may sometimes fail to run or may not run at all. If your refrigerator is clicking or if the compressor won t start even though you can hear the fans running it s possible that the overload relay is arcing or overheating.

If the compressor is clicking on and off or worse not running at all check the start relay. As part of the control panel in the main body of the fridge where the food is kept fresh. As a result the refrigerator will not be cold enough.